<noframes id="vrhbz">
<address id="vrhbz"><form id="vrhbz"><nobr id="vrhbz"></nobr></form></address>

<listing id="vrhbz"><listing id="vrhbz"><progress id="vrhbz"></progress></listing></listing>

      微信掃碼

      • 18707901177
      Cloud Zoom small image

      圓形焊帶

      名稱:圓形焊帶
      可在線通過咨詢了解詳情
       
      通過以下按鈕進入下一步
      • 詳情
      • 評價

                                                                         

       

       

      3、技術要求 technical requirement

      3.1 原材料要求 Raw material requirements

      3.1.1 無氧銅二級(TU1)及以上,純度≥99.97%(Non-oxygenic copper level 2 (TU1) and above, purity (>99.97%))

      3.1.2 錫 Sn99.90 及以上,純度≥99.90%  鉛 Pb99.994 及以上,純度≥99.994%(SN99.90 and above,purity 99.90%    Pb99.994 and above purity99.994%

      3.2 外觀要求 Visual inspection requirements

      涂錫帶表面光潔色澤均勻無毛刺,無竹節、無露銅、無密集型錫顆粒、黑斑、麻點、折斷現象。

      Ribbon surface should be smooth,coating surface is bright metal shape,No burrs,Bamboo joint  , No leak copper, non-dense tin particles, black spots, pitting and breaking phenomena


                                                                                              

      3.3 外形尺寸 The size of appearance

       

       

      (Sepcification) mm(寬度 width×厚度 thiness)

      公差mm

      Size Tolerance mm

      寬度

      厚度

      3.0/4.0/5.0/6.0/7.0×0.20/0.25/0.30/0.35/0.4

      ±0.050

      ±0.01

      0.5/0.6/0.8/0.9/1.0×0.18/0.21/0.23/0.25/0.27

      ±0.050

      ±0.01

      φ0.26/Φ0.28/Φ0.29/Φ0.30Φ0.32/Φ0.35

      -0.005;+0.015

       

       

       

      3.4 錫層厚度 Thickness of coating

       

      (Sepcification) mm(寬度 width×厚度 thiness)

      公差μm

      Single layer Tolerance μm

      3.0/4.0/5.0/6.0/7.0×0.20/0.25/0.30/0.35/0.4

      20-25

      0.5/0.6/0.8/0.9/1.0×0.18/0.21/0.23/0.25/0.27

      15-23

      φ0.26/Φ0.28/Φ0.29/Φ0.30Φ0.32/Φ0.35

      16±4

       

       

       

      3.5 鐮刀彎曲度 Camber

      鐮刀彎曲度≤5‰  Camber of ribbon ≤5‰ ;圓絲不檢測此項 Round tin wire does not detect this item。

       

       

      3.6 電阻率 Resistivity

       

       20℃±2℃ ,濕度 60±10RH

      (Sepcification) mm(寬度 width×厚度 thiness)

      電阻率 Resistivity

      3.0/4.0/5.0/6.0/7.0×0.20/0.25/0.30/0.35/0.4

       

      0.022Ω.mm2/m

      0.5/0.6/0.8/0.9/1.0×0.18/0.21/0.23/0.25/0.27

      φ0.26/Φ0.28/Φ0.29/Φ0.30Φ0.32/Φ0.35

       

       

       

      3.7 物理性能學 Physical performance

       

       

      (Sepcification) mm(寬度×厚度)

      屈服強度

      Yield strength

      伸長率

      Elongation

      拉強度

      Tensile strength

      3.0/4.0/5.0/6.0/7.0×0.20/0.25/0.30/0.35/0.4

      ≤150Mpa

      20%

      135Mσt≤250Mpa

      0.5/0.6/0.8/0.9/1.0×0.18/0.21/0.23/0.25/0.27

       

      ≤65Mpa

       

      25%

       

      160Mpa

      φ0.26/Φ0.28/Φ0.29/Φ0.30Φ0.32/Φ0.35

        

       

      3.8 錫層成分及屬性 The chemical composition of coating and Properties

       

      規格(Sepcification) mm(寬度×厚度)

      Type

      component

      固化溫度 (℃)

      Solidus Temp

      化溫度 (℃)

      Liquidus Temp

      3.0/4.0/5.0/6.0/7.0×0.20/0.25/0.30/0.35/0.4

       

      含鉛

       

      60Sn40Pb

       

      183

       

      190

      0.5/0.6/0.8/0.9/1.0×0.18/0.21/0.23/0.25/0.27

       

      φ0.26/Φ0.28/Φ0.29/Φ0.30Φ0.32/Φ0.35

      含鉛

      60Sn40Pb

      183

      190

      含鉛、鉍型

      43Sn43Pb14Bi

      156

      161

      注:規格尺寸可根據客戶要求定制 (Specifications and sizes can be customized according to customer

      requirements) 。

      4、使用說明 instructions

      4. 1 使用說明 (instructions)

      客戶在使用的,請將焊帶從真空袋中取出,撕掉黃色保護紙,根據串焊機電機傳動方向,將焊帶水平放置

      上進行穿線操作。

      Customers  in  use,  please take  the  ribbon  out  of the  vacuum  bag,  tear  off the  Yellow  protective  paper, according to  the  motor  drive  direction  of the  series welding  machine,  put  the  ribbon  horizontally  on  the equipment for threading operation.

      4.2 標志、包裝、運輸、儲存 (Signs,Packing, Transportation and Storage) 產品應貼有標簽,其上注明:

      Each axle product shall be labeled with:

      1 ) 產品名稱 Product name

      2) 規格 Specification

      3) 產品凈重 Net product Weight

      4) 生產日期 Date of manufacture

      5) 制造廠名稱 Name of manufacturer

      6) 追溯編碼 Retrospective coding

      4.2. 1 包裝 Packing

      產品使用塑料工字輪纏繞包裝,要求每軸由一根線料組成,線圈不能紊亂,線軸邊緣間隙不能超過焊帶寬度

      的一,每軸產品用真空包裝放進紙箱后,疊加至木托板上打十字包帶發貨。

      The product is wrapped with plastic I-wheel, which requires that each axis be made of a wire, the coil should not be disordered, and the gap between the edges of the axis should not exceed half of the width of the welding band. After each axis is packed in a cardboard box with vacuum packaging, it is superimposed on the wooden pallet for delivery with a cross-strap.


      亚洲欧美免费网址,久久99精品久久久久久青青91,在线不卡免费中文字幕亚洲视频,www.精品视频
      <noframes id="vrhbz">
      <address id="vrhbz"><form id="vrhbz"><nobr id="vrhbz"></nobr></form></address>

      <listing id="vrhbz"><listing id="vrhbz"><progress id="vrhbz"></progress></listing></listing>